Special Offer
Save 17%
-
-
Tools & Equipment/Adapters
Adaptor 9v 3A
- Built-in over voltage, over current, and short circuit protection
- PWM design, makes sure the stability and high efficiency of power supply
- Anti-jamming, passed EMC test, wave less than 20MV
- Constant output voltage, supplying stable power supply for LED lighting to achieve long service life
SKU: 00-793 -
Motors/Servo Motors
Servo MG996R
it is Stable and Shock Proof
this is Coreless Motor
it has Metal Gears
it has Double Ball Bearing
its Connector Wire Length 300mm (12″)
its dimensions are 40mm x 19mm x 43mm (approx 1.5″ x 3/4″ x 1.5″)
its weight is just 55g (just over 2 oz)
Operating Speed is just 0.17sec / 60 degrees (4.8V no load)SKU: 00-049 -
Pliers, Tools & Equipment
Wire Cutter (Jakemy JM-CT 4-12)
- Standard specs, form-ground, knife-type blades for accuracy, easy stripping without nicking insulation.
- Built-in wire cutter and looping holes.
- Convenient plier nose and sharp edge for pulling out the wire easily without damaging the wire cores.
- Spring-loaded automatic opening
- Sharp serrated edges in a plier style for wire pulls and loops.
SKU: 00-778
-
Sensors/Imaging
Color Sensor Mandolins TCS3200
- Chip : TCS3200
- Input voltage : DC 3V-5V
- Output frequency voltage : 0 ~ 5V
- Use bright white LED lights
- Can be connected directly with Microcontroller
- Static detection of the measured object color
- Best detection distance : 10mm
- Size : 3×2.4cm/1.18″x0.94
SKU: 00-030 -
Sensors/Misc. Sensors
Water flow sensor Arduino
- Model : YF-S201
- Operating Voltage : 5V ~ 24V DC
- Min. Working Voltage : 4.5V DC
- Sensor Type : Hall Effect
- Current Requirement : 15mA @ 5V
- Operating Temperature Range : -25°C ~ 80°C
- Operating Humidity Range : 35% ~ 90% RH
- Water Pressure : ≤ 1.75MPa
- Flow Rate : 1 – 30 L/min
- Cable Length : 15cm
- Connection Thread : 1/2″
SKU: 00-044 -
Motors/Servo Motors
Servo SG90 9G
Product Description
Modulation: Analog
Torque: 4.8V : 1.8 Kg-cm 6V : 2.2Kg-cm
Speed:
4.8V: 0.10 sec/60°
Dimensions:
Length: 0.91 in (23.1 mm)
Width : 0.48 in (12.2 mm)
Height : 1.14 in (29.0 mm)
Motor Type: 3-pole
Gear Type: Nylon Plastic
Rotation/Support: Bushing
Weight: 9.0 g
Dead Band Width: 10 uS (Microseconds)SKU: 00-050 -
-
Sensors/Misc. Sensors
Tiny Real Time Clock Module
- 24C32 32K I2C EEPROM Memory
- DS1307 based RTC with LIR2032 battery (Battery not included)
- Backup by AT24C32 32Kbit
- DS1307,AT24C32 can work separated
- Leads to the DS1307 clock pin, to provide the clock signal for the microcontroller
- Great for DIY projects
SKU: 00-045 -
Soldering, Tools & Equipment
Soldering Iron (High Low) High Quality 40W
- Soldering iron with 40W power and replaceable tip
- Simple soldering of printed circuit boards / components, using the de-soldering suction pump
Convenient storage when not in use - Power supply: 220 – 240V (don’t support 110V)
- RoHS and CE Approved
SKU: 00-783
Products Grid
Best Sellers
Recently Added
Tools & Equipment/Adapters
Adaptor 9v 3A
Built-in over voltage, over current, and short circuit protection
PWM design, makes sure the stability and high efficiency of power supply
Anti-jamming, passed EMC test, wave less than 20MV
Constant output voltage, supplying stable power supply for LED lighting to achieve long service life
SKU: 00-793
Breakout Modules, Motor Drivers
PCA9685 16 Channel Servo Motor Driver
16 channel servo motor driver power supply is 5V compliant and still talks to a 3.3V microcontroller.
this motor driver contains 6 address select pins.
these address pins are used for configuring up to 62 ICs on a single I2C bus.
this motor driver has an adjustable PWM frequency of up to 1.6KHz almost.
this driver has a 12-bits frequency resolution.
SKU: 00-788
Sensors/Misc. Sensors
Water flow sensor Arduino
Model : YF-S201
Operating Voltage : 5V ~ 24V DC
Min. Working Voltage : 4.5V DC
Sensor Type : Hall Effect
Current Requirement : 15mA @ 5V
Operating Temperature Range : -25°C ~ 80°C
Operating Humidity Range : 35% ~ 90% RH
Water Pressure : ≤ 1.75MPa
Flow Rate : 1 – 30 L/min
Cable Length : 15cm
Connection Thread : 1/2″
SKU: 00-044
Components/LEDs
LED Light Bulb in Pakistan
It has standard lamp holder, so it is easy to replace the existing lamp
Proprietary design for excellent thermal management and lumen maintenance , easy to install , big projection angle, dust proof, prevent electricity leakage , anti corrosion
Adopting constant current power supply which is exclusive for LED lights , efficiently controlling the life span and stability of the lights
Directly replace the traditional bulbs light to save energy and protect environment
SKU: 00-798